MST MXS-532191 FMX 2.0 LCG 1/10 RWD Electric Drift Car Kit (No

Por um escritor misterioso

Last updated 09 novembro 2024

MST MXS-532191 FMX 2.0 LCG 1/10 RWD Electric Drift Car Kit (No

MXS-532191 The MST FMX 2.0 "LCG" 1/10 RWD Electric Drift Car Kit is a mid motor, rear wheel drive kit designed with the enthusiast in mind. Featuring high quality carbon fiber and molded composite parts, super smooth shocks and a plethora of tuning settings available right out of the box, this kit delivers great steering angles in a mid-motor platform that is great for both beginners and experienced enthusiasts alike. This redesigned LCG aluminum motor mount lowers the center of gravity of the motor by up to 5mm than the last generation, which further increases the stability and control. The freshly designed carbon upper deck is separated from the motor mount, increasing the torsion of the car body, reducing the height of the upper deck, and more dynamic and streamlined visual looks.NOTE: Wheels, tires and electronics shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model. Features: Middle motor mounts and centralized configurations Carbon fiber chassis with dual vertical carbon fiber upper deck Redesigned great front suspension system Adjustable Ackerman angle variation in 2 sections of steering system Front steering wheel base KPI at 6 degrees. - 0.5 towing distance of axle Redesigned front upper arm inside seat supports 10-steps bi-side adjustments Full dust-proof rear gearbox with the bevel gear shaft drive Standard ball differential Variable second reduction ratio of the rear axle in a total of 6 variable range of 1.78-3.82 (standard 3.82) Revised MB multi-link rear suspension system Rear drive system equipped with the steel CVD drive shaft Standard aluminum smooth hydraulic damper set Equipped with the high-smooth metal ball connectors Standard equipping with the realistic car brake and caliper set Resigned aluminum motor mount Updated carbon upper deckSpecifications: Type: 1:10 Drift Car Wheelbase: 257mm Width: 190mm Drive Mode: RWD Caster: Adjustable 6/8/10/12 degrees Camber: Adjustable 0 to -12 degreesNeeded to Complete: 1/10 Drift Body & Paint Motor & ESC 2 Channel Radio System (minimum) Steering Servo Shorty LiPo Battery & Charger Wheels & Tires
MXS-532191 The MST FMX 2.0 LCG 1/10 RWD Electric Drift Car Kit is a mid motor, rear wheel drive kit designed with the enthusiast in mind. Featuring high quality carbon fiber and molded composite parts, super smooth shocks and a plethora of tuning settings available right out of the box, this kit delivers great steering angles in a mid-motor platform that is great for both beginners and experienced enthusiasts alike. This redesigned LCG aluminum motor mount lowers the center of gravity of the motor by up to 5mm than the last generation, which further increases the stability and control. The freshly designed carbon upper deck is separated from the motor mount, increasing the torsion of the car body, reducing the height of the upper deck, and more dynamic and streamlined visual looks.NOTE: Wheels, tires and electronics shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model. Features: Middle motor mounts and centralized configurations Carbon fiber chassis with dual vertical carbon fiber upper deck Redesigned great front suspension system Adjustable Ackerman angle variation in 2 sections of steering system Front steering wheel base KPI at 6 degrees. - 0.5 towing distance of axle Redesigned front upper arm inside seat supports 10-steps bi-side adjustments Full dust-proof rear gearbox with the bevel gear shaft drive Standard ball differential Variable second reduction ratio of the rear axle in a total of 6 variable range of 1.78-3.82 (standard 3.82) Revised MB multi-link rear suspension system Rear drive system equipped with the steel CVD drive shaft Standard aluminum smooth hydraulic damper set Equipped with the high-smooth metal ball connectors Standard equipping with the realistic car brake and caliper set Resigned aluminum motor mount Updated carbon upper deck Specifications:Type: 1:10 Drift Car Wheelbase: 257mm Width: 190mm Drive Mode: RWD Caster: Adjustable 6/8/10/12 degrees Camber: Adjustable 0 to -12 degreesNeeded to Complete: 1/10 Drift Body & Paint Motor & ESC 2 Channel Radio System (minimum) Steering Servo Shorty LiPo Battery & Charger Wheels & Tires