Study on the strength of glued laminated timber beams with round holes: proposal of the design formula for the splitting strength, Journal of Wood Science

When a glued laminated timber (GLT) beam with a round hole is subjected to a shear force and bending moment, the hole will crack and fail due to a large tensile stress perpendicular to the grain and shear stresses. If the stresses acting on the hole are known, it is possible to estimate the fracture load. However, it is necessary to obtain the stresses acting on the hole by finite element analysis, which is very time consuming. In this study, to easily estimate the fracture load, we proposed a formula to estimate the bearing capacity at the time of a hole fracture by obtaining the stress acting on the hole through finite element analysis and an approximate formula. The validity of the proposed formula was verified using the existing experimental data of a GLT beam. As a result, it was confirmed that the proposed equation can estimate the fracture load of GLT beams in Japan and that the proposed equation can estimate the fracture load of GLT beams in countries other than Japan with some accuracy.

Study on the strength of glued laminated timber beams with round holes: difference in structural performance between homogeneous-grade and heterogeneous-grade timber, Journal of Wood Science

Study on the strength of glued laminated timber beams with round holes: proposal of the design formula for the splitting strength, Journal of Wood Science

Applied Sciences, Free Full-Text

Design and analysis of timber-concrete-based civil structures and its applications: A brief review

FAQs - American Wood Council

Solved b) Determine whether the bearing strength of the beam

Capacity models for timber under compression perpendicular to grain with screw reinforcement

Experimental investigation of the axial strength of glued-in rods in cross laminated timber

Modelling of Glulam beams pre-stressed by compressed wood - ScienceDirect

Study on the strength of glued laminated timber beams with round holes: proposal of the design formula for the splitting strength, Journal of Wood Science

Study on the strength of glued laminated timber beams with round holes: difference in structural performance between homogeneous-grade and heterogeneous-grade timber, Journal of Wood Science

TEN 09 Glued Laminated Timber Structures Part 2 Construction and Connection Details, PDF, Screw