Can I connect 2 phase 120VAC to a power supply rated for 240VAC input? - All About MEAN WELL Power Supplies

If the two phases are 180o out of phase (split phase system), then yes. The resulting voltage will be around 240VAC, so it can be used with power supplies that has input range of 200VAC-240VAC.If the two phases are 120o out of phase, the resulting RMS voltage will be 208VAC, so it should work, but derating might be needed on some models. For a single-phase operation, you should check the input range of the power supply in its datasheet (derating might be necessary at low input voltage).

How to Connect an AC/DC Power Supply with 120Vac Input #MEANWELL

Resources - All About MEAN WELL Power Supplies

Power Bright 2000-Watts Step Up/Down Converter 110/120-Volt - 220

Can I connect 2 phase 120VAC to a power supply rated for 240VAC

What hardware would I need to power an arduino uno off of this

Inverter 24vdc to 240Vac, 6KVA Inverter Charger

Resources - All About MEAN WELL Power Supplies

Original Mean Well Hdr-150-48 Meanwell 48v Dc 3.2a 153.6w Ultra

4000 Watt Pure Sine Inverter Charger 12Vdc to 120Vac Output